www.mimaki.es
www.exaprint.es
  
English News
«« Primera | « Anterior | 3 | 4 |
5
| 6 | 7 | Siguiente » | Última »» // English News: 3539, mostrando del 81 al 100

Parisian wine bar appears in high gloss with Zanders
(09-04-2018)
For the launch of the new web radio “Radio Vino“, which is all about wine, on March 22 an extraordinary kick-off event was held at the En Vrac wine bar in Paris – the outer walls were completely covered with Chromolux Alu 90 gsm for the occasion. The founder of “Radio Vino”, Thierry Poincin, had strived to create an outstanding event in his renowned wine bar En Vrac that was elected as BEST WINE BAR by the magazine Time-out in 2014. Hence, Poincin had asked Zanders to cover the outer walls of the bar with Chromolux label paper. So the guests of the event, amongst others Zanders’ customers from France, were able to gaze at the exceptional decoration with silver glossy Chromolux Alu.
Perfect opacity with maximum migration safety with Herma
(06-04-2018)
The advantages of the new, low-migration opaque HERMAperfectOpaque adhesives are now also available for film labels: Self-adhesives specialist HERMA extends its range of standard products in this field, adding the material HERMA PP white extra topcoat (grade 880). This polypropylene film allows users to produce visually very appealing, glossy, non-transparent labels. For recycling reasons, these labels are preferably used on PP surfaces.
L9 announce the 2017 World Label Awards Category and Honourable Mention Winners
(06-04-2018)
The L9 group of international label associations are pleased to announce the results of the 2017 L9 World Label Awards (WLA) competition judged by an international panel of judges representing each of the participating associations. The judging took place in Brussels the day before Labelexpo Europe at the exhibition venue. The L9 is an alliance of global label associations formed to jointly formulate policies and collecting strategic information of global interest to the worldwide label industry.
Fespa Asia 2018 brings together asean wide format decision maker community
(05-04-2018)
FESPA Asia (Bangkok, Thailand, 22 - 24 February 2018) has once again been hailed a success, as the international event for screen, digital and textile printers and signage professionals welcomed an audience of 4,328 from 66 countries. Visitors attended from countries spanning the ASEAN region, including Thailand, Malaysia, Singapore and Indonesia, as well as nations from the wider Asian continent, such as India, Sri Lanka, Japan and China. Visitors from Thailand made up 75% of the audience, an increase of 10% when compared with FESPA Asia 2017.
Three new Area Sales Managers join MPS
(05-04-2018)
MPS has made three key appointments to its global sales team in response to successful international sales and preparation of forecasted future growth of its flexo, hybrid and offset printing presses. Joining MPS in the role of Area Sales Manager are Niels van Groenendaal, Suwannee Tantisrisuk and Sebastiaan Rakhorst. Niels van Groenendaal is the dedicated Area Sales Manager for Spain and Latin America. Van Groenendaal brings seven years of international sales experience in Europe and the Middle East, with his most recent role as Sales Account Manager at the Dutch firm Securitech B.V., a supplier of specialized document verification equipment for identity fraud and forensics.
Onevision Software with automation suite for book publishing
(04-04-2018)
With the Book Automation Suite, the German manufacturer of prepress and print workflow software is automating the production processes for book printers and book publishers. A comprehensive prepress package and essential features such as automated impositioning, page splitting (e.g. content and cover pages), as well as automated calculation of spine thickness, are linked to a flexible workflow management system and allow book printers to produce much more efficiently in terms of time and costs.
Taopix announce the first upgrades for the worlds leading photobook and photo gift software platform
(04-04-2018)
“Making our customer’s as successful as possible is at the heart of everything we do here at Taopix.” says James Gray, Founder and CEO of the company. “In close consultation with our customers we’re starting this year’s release calendar with a whole host of improvements to make the user experience simpler, significantly faster and much more seamless to the overall customer journey.’ continues James.
Reproflex Scandinavia delivers added value and quality with Bellissima
(03-04-2018)
Aniken Graphics, a joint venture between Hamillroad Software, a UK based prepress software company, and Apex International, a global leader of anilox and metering products, has today announced that Reproflex Scandinavia is approved to supply flexographic printing plates, screened with Bellissima DMS, to the Scandinavian market.
Heidelberg optimizes financing structure basis for investment in future growth
(03-04-2018)
Heidelberger Druckmaschinen AG (Heidelberg) has further optimized its financing structure and agreed a new syndicated credit line with improved conditions with its banking group. By taking out the credit line with a higher total of €320 million and a term that runs till March 2023, the company is creating financial flexibility and longer-term planning certainty. Besides supporting the day-to-day operational business of the global organization, the new credit facility underpins the strategy of further expanding new digital business models, such as the newly established subscription portfolio.
Avery Dennison recognizes suppliers at fifth Annual Global Awards Ceremony
(02-04-2018)
Avery Dennison Label and Graphic Materials recognized eight pressure-sensitive industry suppliers during the company’s fifth annual supplier recognition ceremony, held March 12-13 in Oegstgeest, Netherlands. Winners were selected based on their performance in areas such as sustainability, innovation, service, and quality.
Mark Andy acquires Presstek
(02-04-2018)
Mark Andy, the Total Solutions Partner to the label and packaging industry, today announced its acquisition of Presstek, a well-known global supplier of DI (direct imaging) offset plates and presses, CTP solutions and world-class service for commercial and in-plant customers. With the Presstek acquisition, Mark Andy now serves as one of the only full-complement solutions providers to the global graphic arts and print industry.
Koenig & Bauer achieves or exceeds targets for 2017
(30-03-2018)
Driven by strong revenue and earnings in the fourth quarter, Koenig & Bauer (KBA) fully achieved or exceeded its guidance for 2017. The printing press manufacturer’s consolidated figures show that with the increase in revenue, earnings and order intake achieved last year it is well on track towards achieving its medium-term targets by 2021.
Klln oatmeal packaging with MOB paper inlay by Feldmuehle
(29-03-2018)
With its barrier papers Feldmuehle Uetersen GmbH offers food producers the possibility to protect their products effectively against pollutants by mineral oil residues. Peter Kölln GmbH und Co. KGaA relies on this solution and uses the material in the packaging of its oat flakes – without any visible changes to the classic paper bag.
ASLAN presents new transparent digital printing film with ultra-strong adhesion
(28-03-2018)
ASLAN, German manufacturer of high quality self-adhesive films for special applications, amends the series of digital printing films with ultra-strong adhesion. ASLAN, German manufacturer of self-adhesive films for special applications, provides a new transparent digital printing film with ultra-strong adhesion. The self-adhesive film UltraTack transparent ASLAN DFP 06, especially designed for long-term applications, is now available for all applications requiring a transparent film.
Nyala stays the European market leader
(28-03-2018)
The swissQprint Nyala large format printer is Europe's best-selling printer in its class for the third time in a row, with the new LED model now having replaced its predecessor. According to the Geneva-based market research institute Infosource, last year the swissQprint Nyala was Europe's best-selling printer model in its class: UV flatbed/hybrid printers >60" (152.4 cm) wide in the EUR 130,000 – 500,000 price segment, compared to all brands surveyed in 2017. This means that Nyala has taken first place for the third time in a row.
Fespa confirms conference programme for inaugural Digital Corrugated Experience
(27-03-2018)
FESPA has confirmed the lineup of expert speakers for the Digital Corrugated Experience conference, which will take place at FESPA Global Print Expo 2018 from 15 to 18 May at the Messe Berlin, Germany. The conference will educate both print service providers (PSPs) and packaging converters about the production of digitally printed packaging and point of sale (POS). The sessions will highlight the technology innovations changing the landscape of printing for corrugated and how digital technology is making production more flexible and dynamic. The seminar sessions will take place in the Digital Corrugated Experience, located in hall 5.2 stand C40 at FESPA 2018.
2018 FINAT Sustainability and Recycling Awards programme now accepting applications
(27-03-2018)
FINAT, the European association for the self-adhesive label industry, announced today the launch of the revised FINAT Sustainability and Recycling Awards Competition. Self-adhesive label converters and label stock manufacturers are invited to apply and receive the recognition they deserve for taking steps to lower their overall environmental impact. The deadline for submitting entries is Friday, May 18th, and the awards ceremony will be held on the opening night of the European Label Forum in Dublin, scheduled for 6 to 8 June 2018.
Dr. David Galton recognised by the European Flexographic Association
(26-03-2018)
Asahi Photoproducts is delighted to announce that its European Sales Director, Dr. David Galton has been recognised by the European Flexographic Industry Association for his outstanding contribution to the Flexo Industry. This lifetime achievement award is the highest honour awarded by EFIA.
Fespa reveals the winners of its Printeriors 2018 Design Competition
(26-03-2018)
FESPA is pleased to announce the three winners of its Printeriors 2018 design competition. The winning designs will feature in this year’s Printeriors Airport Lounge of the Future, at FESPA Global Print Expo, which takes place from 15 to 18 May 2018 at Messe Berlin. The winners are: Linn Warme (Sweden), Freya Richmond (UK), Anne Krogh Tolstrup (Denmark). The winners were decided by competition judges: Christian Duyckaerts, FESPA President and owner of Retail Communicators; Christophe Aussenac, FESPA Vice President and director ATC Groupe; and Debbie McKeegan, textile ambassador for FESPA.
Mondi wins World Food Innovation Award with a packaging solution inspired by nature
(23-03-2018)
The global packaging and paper group Mondi received a World Food Innovation Award 2018 in the “Best Packaging Design” category. The competition – organised for the fourth time by FoodBev media – recognises the company’s innovative concept for the Pistachio Dream box. Out of 220 entries from over 20 countries, the panel selected Mondi’s submission for its increased shelf appeal of dry food products at point of sale.
«« Primera | « Anterior | 3 | 4 |
5
| 6 | 7 | Siguiente » | Última »» // English News: 3539, mostrando del 81 al 100
Destacado
Especial HISPACK 2018

Especial FESPA 2018

Especial C!Print 2017

Servicios

Secciones destacadas dentro de Industria Gráfica Online
Publicidad
www.pixartprinting.es

www.agfagraphics.com